lexprikson.com → definition → access point cisco → boiling point of hexane
Posted on by Derek Ramirez

Boiling point of hexane

Clear lab vial of hexane under controlled conditions, showing slight vapor near the rim

The boiling point of hexane is 68.7°C at standard atmospheric pressure (1 atm). This temperature marks the point at which liquid hexane transitions to vapor under normal conditions.

Hexane is a colorless, volatile hydrocarbon with the molecular formula C₆H₁₄. As a nonpolar solvent, it is widely used in laboratories and industry for extracting oils, fats, and waxes. Its boiling point is determined experimentally using standardized methods such as ASTM D86, which measures distillation endpoints under controlled heat input.

At sea level, where pressure is 101.3 kPa, hexane boils precisely at 68.7°C. This value shifts slightly with changes in altitude or pressure. For example, at 1,500 meters above sea level, where atmospheric pressure drops to ~84.6 kPa, the boiling point decreases to approximately 62.5°C. This variation is predictable using the Clausius-Clapeyron equation, which models vapor pressure against temperature.

Why the boiling point matters in practice

Knowing the boiling point of hexane is essential for safe handling in labs and manufacturing. Because hexane evaporates readily at room temperature, it poses fire and inhalation risks. Its flash point is −2 °C, meaning it can ignite below freezing. The boiling point confirms that hexane vapor accumulates easily in enclosed spaces during heating operations.

In extraction processes, such as those used in food-grade oil refining, operators control temperature to stay below 68.7°C to prevent loss of product through evaporation. Overheating reduces yield and increases hazard risk. Industrial systems often include vapor recovery units to capture hexane vapors before they reach flammable concentrations.

A real-world example occurred in 2018 at a pharmaceutical plant in New Jersey. Workers were using hexane to extract active ingredients from plant material. A heater malfunction caused the temperature to exceed 70°C. The resulting vapor cloud ignited, causing a flash fire that injured two employees. Post-incident analysis confirmed that the boiling point was not properly monitored during setup.

Common misconceptions and distinctions

Hexane is sometimes confused with benzene due to similar names and use in solvents. Benzene has a higher boiling point (80.1°C) and is carcinogenic. Hexane is not classified as a carcinogen by the International Agency for Research on Cancer (IARC), though chronic exposure can cause peripheral neuropathy.

Another error is assuming all alkanes have similar boiling points. Butane (C₄H₁₀) boils at −0.5°C, while octane (C₈H₁₈) boils at 125.7°C. Boiling point increases with carbon chain length due to stronger London dispersion forces. Hexane's boiling point sits between these two, reflecting its six-carbon structure.

Some sources incorrectly report the boiling point as 69°C without specifying precision. The correct value, as listed in the CRC Handbook of Chemistry and Physics (104th edition), is 68.7°C. Using rounded values can lead to errors in process design or safety calculations.

Comparison of common organic solvents

Solvent Boiling Point (°C) Flash Point (°C) Primary Use
Hexane 68.7 −2 Extraction, cleaning
Acetone 56.1 −20 Lab cleaning, paint remover
Chloroform 61.2 23 Historical anesthetic, research
Ethanol 78.4 12 Disinfectant, fuel, solvent

Each solvent has unique volatility and flammability profiles. Hexane's low boiling point makes it ideal for gentle extractions but demands strict ventilation controls. In contrast, ethanol's higher boiling point allows for slower evaporation, reducing fire risk during use.

Firsthand observation from lab work

I once observed a small spill of hexane during a lipid extraction. The liquid disappeared within 45 seconds when left uncovered. The vapor formed a visible haze near the bench edge. This rapid evaporation confirmed the boiling point's practical impact-hexane does not linger as a liquid at room temperature. I now always work under a fume hood and wear nitrile gloves when handling it.

Key facts and references

The boiling point of hexane is consistently reported as 68.7°C in peer-reviewed databases. The National Institute of Standards and Technology (NIST) Chemistry WebBook lists this value with a confidence interval of ±0.1°C based on multiple experimental runs. The CRC Handbook of Chemistry and Physics confirms this figure and notes that purity affects boiling point-impure samples may boil at slightly lower temperatures due to colligative effects.

For safety, OSHA classifies hexane as a hazardous chemical under 29 CFR 1910.1200. Exposure limits are set at 500 ppm (parts per million) for an 8-hour time-weighted average. These limits are based on toxicity data, not boiling point-but understanding the boiling point helps predict vapor concentration in air.

The boiling point of hexane is 68.7°C at standard pressure. This value defines its behavior in storage, transport, and processing. Accurate knowledge prevents accidents and ensures compliance with safety standards.


Related Posts